GPS_Tracker Example not sending datat to ChirpStack
10/21/2021
|
0:00:26
I have a Wisblock Rak5005-0 with a WicBlock GNSS Location Module, 3-axis acceleration sensor and a light sensor (this is not used here soI might just take if off)
I’ve uploaded the GPS_Tracker example that I have customized by adding my own nodeDeviceEUI[8] and nodeAppKey[16] values as show in the ChirpStack Device configuration dashboard.
While the WisBlock is still connected to my PC I can see such data in the Arduno’s Serial Port monitor:
11:06:01.681 → check acc!
11:06:01.681 → X = 252.20mg Y = -5.00mg Z =992.81mg
11:06:11.689 → check acc!
11:06:11.689 → X = 255.21mg Y = -6.00mg Z =996.81mg
11:06:21.697 → check acc!
11:06:21.697 → X = 255.21mg Y = -5.00mg Z =1000.81mg
11:06:31.705 → check acc!
11:06:31.705 → X = 254.21mg Y = -10.01mg Z =993.81mg
11:06:41.668 → check acc!
11:06:41.668 → X = 251.20mg Y = -5.00mg Z =992.81mg
11:06:51.677 → check acc!
11:06:51.677 → X = 252.20mg Y = -4.00mg Z =995.81mg
but nothing in the “Device Data” tab on the ChirpStack.
The only thing I was able to notice was that I did receive the following in the “Lorawan Frames” tab:
The question is why I don’t get any Device Data?
GPS_Tracker Example not sending datat to ChirpStack
Created: 10/21/2021
